RCL112

#112 : 12 LED System for RPM Canisters [3MM,14"/4"]

List:

~~$130.00~~

Your Price:

$99.99

SKU:

RCL112

THIS COMPLETE SYSTEM BUNDLES

Guarantee

This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!

Use RCL112 to add 10 3mm white LED lights to RPM Front Bumper Canisters or RPM Narrow Roof Canisters and RPM Roof Canisters, and 2 3mm red LED lights to RPM Tail Light Canisters. EBS switch is included for dual-intensity brake light action, just like a real car.

Compatible with RPM Light Canister Set RPM80982 & RPM80983 --Direct fit for Slash 4x4, Slash & SC10 RPM Front Bumpers

Compatible with RPM Narrow Roof-Mounted Light Bar Set RPM80782 & RPM80783

Compatible with RPM Roof-Mounted Light Bar Set RPM80922, RPM80923 & RPM80925 --Direct fit for Slash 4x4, Slash & SC10

Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10

Power directly from the RX

COMBO: #104 + #106A + #5422-E

To change LED sizes or colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- DUAL INTENSITY BRAKE LIGHT ACTION
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) standard 10 LED controller	#5051	LED CONTROLLERS
(1) RX Direct2LED™	#5075	LED CONTROLLERS
(1) electronic brake switch	#5092	POWER SOURCES
(1) RX plug	#5073	POWER SOURCES
(4) 4" wire extensions	#5390-4	WIRE LENGTHS
(8) 14" wire extensions	#5390-14	WIRE LENGTHS
(10) 3mm white LEDs	#5280-W	LED SIZES & COLORS
(2) 3mm red LEDs	#5280-R	LED SIZES & COLORS
(12) chrome 3mm LED holders	#5081-3	INSTALLATION HARDWARE
(12) 2P connector housings	-
(1) 1.25"x0.5" aluminum tape x18	#5081-3
(1) 3.75"x3" aluminum tape	#5080
(14) zip ties & bases	#5080

UPC# 813487010635

Specs

SYSTEM CURRENT DRAW (@6V): 240mA
(A standard servo draws approx. 350mA)

LED Controller & RX Direct2LED™
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Electronic Brake Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 120mA

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Quick Start Guide
Step-by-Step
Standard 10 LED Controller
Standard 10 LED Controller TECH SHEET
RX Direct2LED™ 3 LED Controller
LED-to-Plug and Play Connector
LED-to-RPM Canister
Electronic Brake Switch
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

Any available LED1-6 or AUX1-4 channel on the LED controller can be used to add an additional LED.

Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using LINK channels.

Parts Required: LED Controllers (#5051 or #5075)

Optional Power Sources

If an extra channel is not available on your RX you will need a Y-harness or a RX Pass-Thru™ (#5074)
Turn lights on/off from an available channel on the RX/TX 2-position switch (#5090)
Dual-intensity brake light action just like a real car (in-line with ESC or throttle servo; #5092)
For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
To run off a 9V battery use a 9V battery clip (#5072)

Parts Required: Electronic Control Switches (#5090, #5092) or Power Sources (#5071-#5074)