RCL5004E

#5004-E: Head & Brake Lights [5MM, 14"]

List:

~~$94.00~~

Your Price:

$72.99

SKU:

RCL5004E

THIS COMPLETE SYSTEM BUNDLES

Guarantee

Use RCL5004E to install 2 white headlights and 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 4 extra constant LED channels for adding additional headlights or fog lights and 2 extra switched LED channels for adding additional brake lights. EBS switch is included for dual-intensity brake light action, just like a real car.

Powered directly from the RX.

COMBO: #5004 + #5092

To change headlight or tail light colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

- BRIGHTEST LEDs INDUSTRY WIDE
- DUAL INTENSITY BRAKE LIGHT ACTION
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

Includes

	Replacement P/N
Instruction Set	-
(1) standard 10 LED controller	#5051	LED CONTROLLER
(1) electronic brake switch	#5092	POWER SOURCE
(4) 14" wire extensions	#5390-14	WIRE LENGTHS
(2) 5mm white headlights	#5290-W	LED SIZES & COLORS
(2) 5mm red tail lights	#5290-R	LED SIZES & COLORS
(4) chrome 5mm LED holders	#5081	INSTALLATION HARDWARE
(4) standard 5mm LED holders	#5082
(4) 2P connector housings	-
(1) 1.25"x0.5" aluminum tape x18	#5081
(1) 3.75"x3" aluminum tape	#5080
(6) zip ties & bases	#5080

UPC# 813487010352

Specs

SYSTEM CURRENT DRAW (@6V): 95mA
(A standard servo draws approx. 350mA)

LED Controller
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Electronic Brake Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 120mA

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

Limited Lifetime Warranty

Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.

Installation Instructions

Quick Start Guide
Step-by-Step
Standard 10 LED Controller
Standard 10 LED Controller TECH SHEET
LED-to-Plug and Play Connector
LED-to-Body
Electronic Brake Switch
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<

Customize Your Lighting System

Change LED Sizes/Colors

Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.

Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red

Parts Required: LEDs (#528*-* or #529*-*)

Change/Extend Wire Lengths

Any wire extension included with this lighting system can be replaced or extended with any length wire extension.

Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]

Parts Required: Wire Extensions (#5390-*)

Add Additional LEDs

Any available LED1-6 or AUX1-4 channel on the LED controller can be used to add an additional LED.

Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)

To add additional LEDs beyond the limits of the LED controller use additional LED controllers and power using LINK channels.

Parts Required: LED Controllers (#5051 or #5075)

Optional Power Sources

If an extra channel is not available on your RX you will need a Y-harness or a RX Pass-Thru™ (#5074)
Turn lights on/off from an available channel on the RX/TX 2-position switch (#5090)
Dual-intensity brake light action just like a real car (in-line with ESC or throttle servo; #5092)
For long run hours (24+) use a 3AA battery holder (with built-in power switch; #5071)
To run off a 9V battery use a 9V battery clip (#5072)

Parts Required: Electronic Control Switches (#5090, #5092) or Power Sources (#5071-#5074)