Loading... Please wait...
Universal
Plug-N-Play
Product Lines
Lights are designed to be used in extreme nighttime and low visibility running environments and are very high output.
DO NOT look directly
into beam.
Our Newsletter
New Product Release &
Promotional e-mails.
#5422-E : Electronic Brake Lights - Red [3MM,14"]
This is your no-solder LED lighting solution for RPM Light Canisters & RPM Tail Lights!
Use RCL5422E to add 2 3mm red LED lights to RPM Tail Light Canisters.
OR
Use RCL5422E to install 2 red dual-intensity electronic brake lights to any 1:12 to 1:8 size R/C car or truck with 1 extra constant LED channels for adding an additional brake light.
EBS switch is included for dual-intensity brake light action, just like a real car.
Compatible with RPM Tail Light Set RPM81030 --Direct fit for Slash & SC10 Bumpers
Power directly from the RX
To change tail lights to be 5mm in size use 5mm LEDs.
Everything needed for a complete installation is included with every lighting system!
- BRIGHTEST LEDs INDUSTRY WIDE
- DUAL INTENSITY BRAKE LIGHT ACTION
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED
Includes
| Replacement P/N | ||
| Instruction Set | - | |
| (1) RX Direct2LED™ | #5075 | LED CONTROLLER |
| (1) electronic brake switch | #5092 | POWER SOURCE |
| (2) 14" wire extensions | #5390-14 | WIRE LENGTHS |
| (2) 3mm red tail lights | #5280-R | LED SIZES & COLORS |
| (2) standard 3mm LED holders | #5082-3 | INSTALLATION HARDWARE |
| (2) 2P connector housings | - | |
| (1) 3.75"x3" aluminum tape | #5080 | |
| (4) zip ties & bases | #5080 |
UPC# 813487010611
Specs
SYSTEM CURRENT DRAW (@6V): 55mA
(A standard servo draws approx. 350mA)
RX Direct2LED™
INPUT VOLTAGE: 3.6-7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA
Electronic Brake Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 1.2A
Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA
Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA
Limited Lifetime Warranty
Every RC-LIGHTS LED is guaranteed against manufacturer defect for the lifetime of the LED (10 TEN Years). All system components are guaranteed against manufacturer defect for 2 TWO Years after the original date of purchase. Should your LED ever not light contact us immediately and a replacement will be sent right away. Warranty does not cover damage due to powering the LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation. Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of improper use or modification.
Installation Instructions
Step-by-Step
RX Direct2LED™ 3 LED Controller
LED-to-PnP Connector
LED-to-Body
LED-to-RPM Canister
Electronic Brake Switch
Wiring Diagram
LED Specs
Complete Set (.PDF)
>>> SUPPORT INDEX <<<
Customize Your Lighting System
Change LED Sizes/Colors
Any LED included with this lighting system can be replaced with any size or color LED available exclusively through RC-LIGHTS.Sizes: 3mm, 5mm
Constant Colors: Blue, Amber, Green, White, Red
Strobing Colors: White, Red
Parts Required: LEDs (#528*-* or #529*-*)
Change/Extend Wire Lengths
Any wire extension included with this lighting system can be replaced or extended with any length wire extension.Lengths: 4" [100mm], 6" [150mm], 8" [200mm], 14" [350mm], 24" [600mm]
Parts Required: Wire Extensions (#5390-*)
Add Additional LEDs
Any available channel on the RX Direct2LED™ can be used to add an additional LED.Parts Required: LEDs (#528*-* or #529*-*) + Wire Extensions (#5390-*)
To add additional LEDs beyond the limits of the LED controller use additional LED controllers.
Parts Required: LED Controllers (#5051 or #5075)
Free Shipping
Offer
ship anywhere in the world
for FREE!